PC hollow sheet PC 12

Construction of the building materials industry to meet the "two-oriented" society demands, energy saving, emission reduction, and comprehensive utilization of resources to develop energy-saving building materials, building materials industry is still an important theme. Our company produces foam board, hollow sheet and solid sheet are green building materials.

PC Hollow Sheet Storage:

     (1) to save in the room, never allow direct sunlight or rain

     (2) hand-stacked and stacked height of not more than 2.2 meters. Board shall ballast, between the plates may not have a hard object.

     (3) The storage room should be kept clean, dry and away from dust intrusion. Room should not also store other chemicals.

     (4) PC Hollow Sheet storage, shall not be damaged or torn off protective film.

     (5) Transportation must be flat on a clean plate surface area greater than the tray, if necessary, should be properly tied to prevent vibration and sliding plate to protect the good side not to damage and double-sided protective film intact.

PC Hollow Sheet Cleaning:

     (1) cleaning must be below 60 ℃ warm water rinse.

     (2) application of a neutral detergent cleaning, does not allow use of solar panels have erosion of the detergent.

     (3) request with a soft cloth or sponge dipped in a neutral liquid gently scrub. Disable coarse, brushes, mops and other hard, sharp tool to implement clean.

     (4) which appears on the surface of an empty plate grease, the paint is dry, tape imprinted with a soft cloth and other points when alcohol scrub.

     (5) must be cleaned with water to rinse thoroughly under the dirt.

     (6) Finally, PC Hollow Sheet with a clean cloth to polish the surface dry, non-obvious traces of water.